Winter Sale Save Up To £100*

£50 off orders over £500 & £100 off orders over £1,000

Offer ends 30th January 2016

Diagonal Corner finishing panels

Price From £18.00

GardenTrellisJul15-062.jpg
  • New

Size: 450mm wide x 450mm high Corner Diagonal (D40)

  • Natural / Unpainted
  • Autumn Tide
  • Black
  • Dedham Vale
  • Gorse Green
  • Greenwich Green
  • Manhattan Grey
  • Orford Cream
  • Rosewood Stain
  • Stone
  • Teak Stain

The colour of the swatches may differ slightly from the actual paint finish due to the limitations of displaying images on websites. Samples are available to order.

- +

£18.00 INC. VAT

£18.00 per item

Free delivery on orders over £420*
*T&C's Apply see our delivery page.

Our diagonal corner finishing panels are perfect for complementing pergolas or other garden structures. Available in a natural finish or choose from 10 paint and stain options. Please note that posts and top capping are sold separately.

  

Specification

  • Diagonal (D40)
  • Slat - 20mm x 9mm with rounded edges
  • Grooved frame with rounded edges - 30mm x 35mm
  • Trellis made with a gap size of approximately 40mm between slats
  • Manufactured using treated FSC timber that has been treated for external use
  • Compatible with concrete and timber fence posts
  • Available in natural timber or choose from a selection of 10 paint and stain finishes
  • Pre-painted or stained panels save work on site and are prepared in special temperature controlled conditions using a European exterior paint for a smooth, consistent and durable finish.

Share This Item:

Fence Calculator

Still not sure what you need? Contact Us Today

Length of Fencing(Metres / Feet)

0
+
Metres
or
Feet
ft
inches

What you will need

Panels
(1800mm each)
0 Posts
(70mm each)
0
You may need your last panel cut to order (0m excess)
Please note: Calculations are based on a 1800mm panel and a 70x70mm post.
*This is to be used for a rough calculation and is to be used as a rough guide only..
**Slatted panels fit to the face of the posts and cannot be calculated using this tool.